 |
 |
 |
 |
5309 Revo 3.3 4WD Nitro Monster 2.4GHz RTR
- SPECS: Vehicle-
- Length: 20.315" (516mm)
- Width: 16.125" (414mm)
- Height: 10.375" (264mm) overall
- Weight: 9.4lbs (4264g) no fuel
- Wheelbase: 13.7" (348mm) wheels on-center front-to-rear
- Front and Rear Track: 16.125" (409mm)
- Center Ground Clearance: 4" (101mm)
- Gear Ratio 1st Gear: 23.85:1
- Gear Ratio 2nd Gear: 15.22:1
- Tires- Front and Rear: 5.75" x 3.5" (146 x 89mm)
- Body-
- Length: 19.4" (494mm)
- Width: 7.1" (180mm) in front of rear wheels (widest point)
- 6.2" (159mm) behind from wheels (thinnest point)
- Height: 5.1" (129mm)
INCLUDES: Traxxas Revo 3.3 2.4Ghz truck w/oil-filled shocks, 3.3 engine, EZ- Start, painted body, tires, wheels, foam inserts, 2.4GHz radio with two digital high torque ball bearing servos, RX & EZ-Start batteries, charger, fuel bottle, extra glow plug & air filter tool set, illustrated manual, decals, air filter, engine setup DVD, long travel rocker and spring set REQUIRES: Fuel: Traxxas 10%-20% Top Fuel Radio Batteries: 12 AA batteries Building and Track Equipment: Screwdrivers, hobby knife
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- New features different from the #5308 Revo include;
- Traxxas TQ 2.4GHz Radio System
- Two Digital High-Torque Ball Bearing Servos
- Five Cell Flat Receiver Pack
- OptiDrive Reversing Transmission
- Receiver and EZ-Start Batteries with Chargers
- Geode Chrome Wheels
- 6.3" Maxx Tires
- New Wide-Track Body with Custom Graphics
-
- FEATURES: Chassis: 6061-T6 aluminum 1/8" (3mm) thick 3D semi-monocoque, 1.2"
- (30mm) longer than Revo 2.5 chassis with chassis to engine brace to
- handle higher power of TRX 3.3 engine, integrated roll hoop and
- carry handle
- Drive: Four wheel drive
- Drive Type: Shaft driven, shafts are .71" (18mm) diameter with
- rubber shielded half shafts and rubber shielded stub axle bearings
- Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
- carburetor, EZ Start, and two high flow dual stage air filters
- EZ Start Battery: 1500mAh 6-cell with charger
- Exhaust: Polished resonator dual chamber aluminum tuned pipe
- Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
- Radio: Traxxas TQ 2.4GHz 3-ch radio system with two #2075 digital
- high-torque ball bearing servos, 1200mAh 5-cell receiver battery
- and charger
- Clutch: Two shoe composite construction
- Transmission: Traxxas OptiDrive electronic transmission control for
- safe, smooth gear engagement-forward and reverse
- Ball Bearings: Full set included, rubber sealed bearings used in all
- exposed locations
- Shocks: 4 GTR inboard mounted, maintenance free, silicone oil-filled,
- hard anodized Teflon coated bodies with TiN shafts
- Main Gear: 38 tooth, plastic construction
- Gearbox: Sealed front and rear
- Differentials: Maintenance free, sealed with silicone X-rings and
- gaskets, limited slip action can be tuned using different viscosity
- oil
- Brakes: Alloy calipers, giant 1.6" (40mm) diameter drilled and vented
- steel rotor and semi-metallic friction material
- Tires: 6.3" (160mm) outer diameter Maxx with foam inserts, 3.3"
- (84mm) wide, 3.8" (96mm) inner diameter
- Wheels: 6-spoke chrome, Geode 3.8" (96.5mm) diameter, 2.7" (70mm)
- wide, 17mm hub size
- Tires and wheels are compatible with the Maxx series
- Body: Prographix wide-track, trimmed, decaled and painted
- Bumpers: Front and rear, plastic construction
- Suspension: Variable progressive two rocker design, suspension travel
- not limited to length of shocks
- Ride height, suspension travel, and progressive rate can be
- adjusted totally independent of each other
- Rubber sealed pivot balls can be adjusted with included tool
- without removing seals, steel pivot ball retaining rings
- Caster: Adjustable, caster/toe-in refers to the angle of the front
- suspension when viewed from the side of the car in relation to the
- chassis
- Camber: Adjustable, camber refers to the angle of the tops of the
- tires from vertical when viewed from front or behind vehicle
- Steering: Ball bearing enhanced with high-torque servo driving a
- heavy-duty servo saver
- Warranty: 30 day limited warranty on electronic components through
- manufacturer.
- Chassis and engine are warranted free from defects at the date of
- purchase before use. No warranties are expressed or implied that
- cover damage caused by normal use or wear, or cover or imply
- how long any chassis or engine part will last before requiring
- replacement due to wear.
|
|
 |
 |
 |
 |
|
 |

|