 |
 |
 |
 |
|
 |
|
Features
- Chassis: Titanium anodized 6061-T6 aluminum 1/8" (3mm) thick 3D
- semi-monocoque with integrated roll hoop and carry handle
- Drive: Four wheel
- Drive Type: Shaft driven, shafts are .71" (18mm) diameter with
- half shafts and rubber shielded stub axle bearings
- Engine: Traxxas .20 cu in (3.3cc) racing engine with slide valve
- carburetor and high flow dual stage air filter with 60% more peak
- horsepower than the TRX 2.5 engine, EZ-Start electric starter and
- 7.2V battery
- Exhaust: Polished resonator dual chamber aluminum tuned pipe
- Fuel Tank: Low profile 5.1oz (150cc) with flip top cap
- Radio: Traxxas TQ 2.4GHz pistol grip with steering and throttle
- sensitivity, steering and braking percentage and Traxxas Link
- technology that stores settings for up to 20 Traxxas Link enabled
- models
- Clutch: Two shoe composite construction
- Transmission: Auto shifting wide ratio two speed, forward only
- Ball Bearings: Full set included, rubber sealed bearings used in all
- exposed locations
- Shocks: 4 GTR inboard mounted, maintenance free, silicone oil-filled
- hard anodized Teflon coated bodies with TiN shafts
- Main Gear: 38 tooth, molded plastic
- Gearbox: Sealed front and rear
- Bumpers: Flexible molded front and rear tube style
- Suspension: Linkage based for long travel and precise tuning
- adjustments and control
- Differentials: Maintenance free, sealed with silicone X-rings and
- gaskets, limited slip action can be tuned using different viscosity
- oil
- Brakes: Alloy calipers, giant 1.6" (40mm) diameter drilled and vented
- steel rotor and semi-metallic friction material
- Tires: Multi terrain, soft compound rubber 1.6" (42mm) wide, 4.3"
- (109mm) diameter with foam inserts
- Wheels: Beadlock design 5-spoke satin chrome finish, 2.2" (56mm)
- diameter, 1.6" (41mm) wide
- Body: Traxxas ProGraphix pre-painted and trimmed with decals applied
- Bumpers: Front and rear, plastic construction
- Suspension: Variable progressive two rocker design, suspension travel
- not limited to length of shocks, ride height, suspension travel
- and progressive rate can be adjusted totally independent of each
- other, rubber sealed pivot balls can be adjusted with included tool
- without removing seals, steel pivot ball retaining rings
- Caster: Adjustable, caster/toe-in refers to the angle of the front
- suspension when viewed from the side of the car in relation to the
- chassis
- Camber: Adjustable, camber refers to the angle of the tops of the
- tires from vertical when when viewed from front or behind vehicle
- Steering: Ball bearing enhanced with twin high-torque servos driving
- a heavy-duty servo saver
- Warranty: 30 day warranty on electronic components
- Chassis and engine are warranted free from defects at the date of
- purchase before use. No warranties are expressed or implied that
- cover damage caused by normal use or wear, or cover or imply
- how long any chassis or engine part will last before requiring
- replacement due to wear.
-
- INCLUDES: Traxxas Slayer Pro 4WD truck w/ oil-filled shocks, 3.3 engine, EZ-
- Start, painted body, tires, wheels, foam inserts, 2.4GHz radio w/
- digital ball bearing steering servo, one standard servo, 15T clutch
- bell, 38T spur gear, tool set, illustrated manual, decals, two air
- filter elements, filter oil, engine setup DVD, long travel rocker
- and spring set, 7.2V battery, wall charger, extra glow plug and
- fuel bottle
-
- REQUIRES: Fuel: Traxxas 10%-20% Top Fuel
- AA Radio Batteries: 8, 4 for transmitter 4 for receiver
-
- SPECS: Vehicle-
- Length: 22.36" (568mm)
- Width: 11.65" (296mm)
- Height: 8.43" (214mm)
- Weight: 7.6lb (3430g)
- Wheelbase: 12.7" (323mm)
- Front and Rear Track: 11.65" (296mm) outer edges of tires
- Front and Rear Tread: 9.5" (241mm) center of tires
- Center Ground Clearance: 2.6" (67mm)
- Body-
- Length: 21.5" (546mm)
- Width: 9.4" (238mm) behind front wheels, narrowest point
- 11.4 (290mm) at rear wheels, widest point
- Height: 5.5" (139mm)
|
|
|
|
|
|
|
|
|
